Tormek Centreing Knife Jig

Product Description

With Tormek’s patented KJ-45 Centreing Knife Jig, you’ll get symmetrical bevels with the same angle on both sides of the knife, regardless of the thickness or geometry of the blade. Whether you’re sharpening a regular kitchen knife or a thicker, tapered hunting knife, you’ll get the same results on both bevels of the knife without needing to reset the jig.

The KJ-45 Centreing Knife Jig fits most types of knives: household knives, chef’s knives, craft knives and knives for hunting and fishing. It also works for the woodcarver’s straight drawknives and the gardener’s pruning shears.

Why KJ-45 Centreing Knife Jig?

• Centresthe knife in the jig for optimal, symmetrical results.
• Centres tapered knives and holds them firmly.
• An extra stop for tall knives, such as cleavers.
• Ability to shape a slightly convex edge with a movement between the two stops.
• Robust design – zinc cast clamps and durable composite handle.
• Well balanced – most of the weight is focused to the clamps, which provides a more balanced feel when sharpening.
• Slides smoothly with low friction against the universal support.
• Works with both Tormek T-4 and Tormek T-8, as well as older models.

Centreing for symmetrical sharpening

When you mount your knife in the KJ-45 Centreing Knife Jig, the knife self centres in the jig, whatever its thickness or geometry. This means that the jig centres everything from the thinnest knives to knives with a thickness of up to 10mm (7/16″). It also means that knife blades that taper off from back to edge and heel to tip are centred in the jig, providing symmetrical grinding on both bevels of the knife. Easy setup, perfect results.

Guided freedom

Because the KJ-45 Centreing Knife Jig is positioned with the stop resting freely against the universal support, you are able to follow the shapes of the knife, always guided by the universal support as a reference point. This makes it possible to sharpen knives with different blade shapes, from craft knives to recurve knives and classic chef’s knives.

Fits most knives

The KJ-45 Centreing Knife Jig centers knife blades up to 10 mm thick. You can sharpen knives with blades down to 60 mm (2 3/8″) long and 12 mm (8/16″) tall. For smaller knives, you can combine the knife jig with theSVM-00 Small Knife Holder, which enables you to sharpen even your very smallest knives. The KJ-45 Centreing Knife Jig has an extra stop that makes it possible to sharpen really tall knives, such as cleavers. In combination with theUS-430 Universal Support Extended, you can sharpen even taller knives or tools.

For knives with long and flexible blades, such as filleting knives, there is theKJ-140 Wide Centreing Knife Jig, which stabilizes flexible blades for even and symmetrical results.

View other products in Sharpening Machines »