Crucible Exeter Hammer

Product Description

After years of research, prototyping and testing, Cruciblehave developed an ideal furniture-maker’s hammer. With a 9.8-ounce (280g) steel head and a balanced octagonal hickory handle, the Crucible Exeter-pattern hammer is suitable for many common tasks at the bench.

Lighter than the typical carpenter’s hammer, the Exeter-pattern excels at driving the typical 4dand 6dbrads used in traditional case construction. Its 7/8” (22mm)octagonal striking face is slightly domed. This allows you to drive a nail flush without damaging the surrounding wood.

On the backside of the hammer’s head is a 1/8” (3.2mm)x 7/8” (22mm)peen. It is great for starting nails or wooden wedges without damaging your fingers. You pinch the nail (or wedge) between your fingers and start it with the peen, which slips between your fingers without hurting them. Then spin the hammer around and sink the nail.

The Lost Art Press crew also use the Exeter for adjusting bench planes. It has enough “oomph” to move the iron. And to drive drawbore pins and pegs galore.

The 10” (250mm) – long octagonal hickory handle (made in South Carolina by Caleb James) tapers to a slender 9/16” (14mm)x 3/4” (19mm)neck below the head, allowing you to choke up on the tool for delicate tasks. The handle ends with a slight swelling. As you let the handle slide through your hand, you’ll feel the slight swelling. That’s where you tighten your grip, giving you the maximum leverage for a strike.

The design of our Exeter-pattern hammer comes from old British tool catalogs and examples they’ve studied. While American woodworkers might find the form unusual at first sight (where’s the claw, maw?), the tool’s balance and its handy peen should win you over.

The hammer heads are4-9/16” (116mm)long overall and aremilled atMachine Timein Nicholasville, Kentucky. Then Crucibleassemble and finish them here in Covington, Kentucky.

They take pride in the work theydo. So each employee now stamps the handle with a touchmark after assembling the hammer. Chris’s symbol is a bumblebee. Kale is an “X.” Mark is a shamrock. Gabe is an arrow. And Megan is a cat.

View other products in Crucible Tool »